Skyjack SJIII Series Operating Manual page 25

Visual and Daily Maintenance Inspections
Conventional
Wheel/Tire
Wheel Motor
Steer Cylinder Assembly
•
-
Ensure steer cylinder assembly is
properly secured and there are no loose
or missing parts.
Wheel/Tire Assembly
•
The aerial platform is either equipped with
solid rubber tires or foam-filled tires. Tire
and/or wheel failure could result in an aerial
platform tip-over. Component damage may
also result if problems are not discovered and
repaired in a timely fashion.
-
Check all tire treads and sidewalls for
cuts, cracks, punctures and unusual
wear.
-
Check each wheel for damage and
cracked welds.
-
Check each lug nut for proper torque to
ensure none are loose.
-
Check wheel motor assembly for loose
or missing parts and signs of visible
damage.
-
Ensure wheels are aligned and true
vertically and horizontally.
SJIII Compacts & Conventionals
Greasing Point
Tie Rod (Conventionals)
•
-
Greasing Points
•
-
February 2008
Section 2 - Operation
Wheel/Tire
Tie Rod
Ensure there are no loose or missing
parts, tie rod end studs are locked and
there is no visible damage.
Ensure greasing points have no sign of
visible damage and are free from dirt and
obstructions.
SKYJACK, Page 27
Steer Cylinder