Skyjack SJIII Series Operating Manual page 26

Section 2 - Operation
Compact
Emergency Lowering
Load/Tilt
Sensor
Greasing Point
2.8-7 Hydraulic/Electric Tray Side
-
Ensure tray latch is secure and in proper
working order.
Pothole Protection Device
•
-
Ensure mechanisms have no sign of
visible damage and are free from dirt and
obstructions.
Hydraulic Tank
•
-
Ensure hydraulic filler cap is secure.
-
Ensure tank shows no visible damage
and no evidence of hydraulic leakage.
Hydraulic Oil
•
-
Ensure platform is fully lowered, and then
visually inspect the sight gauge located
on the side of the hydraulic oil tank.
-
The hydraulic oil level should be at or
slightly above the top mark of the sight
glass.
Hydraulic Pump and Motor
•
-
Ensure there are no loose or missing
parts and there is no visible damage.
Electrical Panel
•
-
Ensure panel is properly secured and
there is no visible damage.
-
Ensure there are no loose wires or
missing fasteners.
SKYJACK, Page 28
Access Rod
Main Manifold
February 2008
Visual and Daily Maintenance Inspections
Hydraulic Pump and
Motor
Proportional and Main Manifolds
•
-
Ensure all fittings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
-
Ensure there are no loose wires or
missing fasteners.
Load/Tilt Sensor
•
-
Ensure load/tilt sensor is properly secure
and there is no visible damage.
Emergency Lowering Access Rod
•
(If Equipped)
-
Ensure rod is properly secured and there
is no visible damage.
Greasing Point
Electrical Panel
Hydraulic/Electric
Tray
Hydraulic Tank
SJIII Compacts & Conventionals