Section 2 - Operation
Conventional
Test Pothole Sensor
•
Ensure that you maintain three points of
contact to mount/dismount platform.
1. Use the ladder to dismount from platform
and place a block (approximately 3.75 cm)
under the hydraulic/electric tray.
2. Use the ladder of aerial platform to access
platform.
3. Close the gate.
4. Raise the platform until approximately a
height of 2 meters is reached and attempt
to drive forward or reverse.
Result: Aerial platform should not move
forward or backward.
5. Repeat the steps above with block placed
under battery tray.
Result: Aerial platform should not move
forward or backward.
SKYJACK, Page 36
Pothole Protection
Device
wARNiNG
February 2008
Test Speed Limit
•
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
1. Ensure path of intended motion is clear.
2. Raise the platform until approximately a
height of 2 meters is reached and attempt
to drive forward or reverse.
Result: Aerial platform should move slower
than when it is in stowed position.
SJIII Compacts & Conventionals
Function Tests
Compact
Pothole Protection
Device
wARNiNG