Skyjack SJIII Series Operating Manual page 32

Section 2 - Operation
Lift/Drive/Steer Enable
Trigger Switch
Torque High/Low
Switch
Lift/Off/Drive
Switch
Horn Pushbutton
Test Platform Emergency Stop
•
1. Push in "
and attempt to activate any platform
function.
Result: All selected platform functions
should not operate.
Test Enable Trigger Switch
•
1. Pull out "
2. Without activating "
switch, attemp to activate any platform
function.
Result: All platform functions should not
operate.
Test Steering
•
1. Select lift/off/drive switch to "
position.
2. Activate and hold "
switch.
3. Press rocker switch on top of controller
handle to "
right.
Result: Steer wheels should turn left and
right.
SKYJACK, Page 34
" emergency stop button
" emergency stop button.
" enable trigger
" drive
" enable trigger
" left and "
Rocker Switch
Controller
Test Driving
•
1. Ensure path of intended motion is clear.
2. Activate and hold "
3. Slowly move controller handle in "
Test Brakes
•
1. Ensure path of intended motion is clear.
2. Activate and hold "
"
February 2008
Operation Light
Base/Off/Platform
Key Switch
Emergency Stop Button
switch.
forward or " " reverse direction until aerial
platform begins to move, and then return
handle to center position.
Result: Aerial platform should move in
forward or reverse direction, and then
come to a stop.
wARNiNG
Brakes will engage instantly when you
release the controller handle, causing
aerial platform to stop immediately.
switch.
SJIII Compacts & Conventionals
Function Tests
"enable trigger
"
" enable trigger