Installation - Philips AUT3268 User Manual

Hot
1
Cold
2
Three-way ball valve
3
Drain connector
4
IV. Installation
Note:
- Before installation, it is important to check the condition of the system to make sure it
has not been damaged during transport.
- Unpack the system and its accessories. Remove the protective packaging material.
Recyclable materials have been used for the packaging and should be disposed of in the
appropriate recycling bins or at the speci�c local recycling center.
Warning: Keep plastic bags out of the reach of children, as they may be dangerous.
- Check if anything is missing according to the packing list and the overview.
- Given that the system will improve the quality of your drinking water, all tools to be used
in the installation process should be clean, rust and grease-free.
2
1
3
4
5
6
PP CB
Cold water inlet to manifold
5
Drain outlet to manifold
6
Water tank to manifold
7
Faucet to manifold
8
3
8
7
RO