Product Overview And Installation Illustration - Philips AUT7006 User Manual

Applicable water source
** When the inlet water pressure exceeds 0.4 MPa, a pressure relief valve should be
installed before the system. When the inlet water pressure is below 0.1 MPa, a
pressure booster should be installed before the system. The pressure relief valve and
extra pressure booster need to be purchased separately.
*** If the salinity of inlet water exceeds 1500 ppm, or the hardness exceeds 15 °HF,
the lifetime of the �lters may be impacted. Please consult with your dealer about
installing pre�lters before the system.
III. Product overview and installation illustration
2
1
3
Cover
1
Reverse osmosis �lter (RO)
2
PC 4-in-1 �lter
3
System
4
Faucet and accessory
5
Quick connect �tting
6
Municipal tap water, which meets all European
Directive on Water for Human Consumption 98/83
requirements and its national transpositions in the
various EU member states.
4
2
5
Three-way ball valve
7
1/4" PE pipe
8
3/8" PE pipe
9
Power adapter with plug
10
Drain connector
11
Wrench
12
6
7
9
8
10 11
12