Connect The Water Outlet And; Connect The Drain Water Outlet And - Philips AUT3268 User Manual

5. Connect the water outlet and the faucet
After you measure the length of the 1/4" pipe you need to connect the system and the
faucet, cut the 1/4" pipe with a pipe cutter. Insert one end of the pipe into a quick connect
�tting, and connect the quick-connect �tting on the stem of the faucet.
Insert the other end of the 1/4" pipe into the �ltered water outlet hole in the back of the
system until it stops. Use a clip to secure the pipe at the hole.
6. Connect the drain water outlet and the drain connector
Identify the drain outlet location. Drill a 6.5mm hole on the drain pipe. Install the drain
connector according to the diagram. Securely tighten the nuts. Cut a section of 1/4" pipe.
Insert one end of the pipe into the drain outlet hole in the back of the system until it stops.
Use a clip to secure the pipe at the hole. Insert the other end of the pipe into the drain
connector.
Filtered water outlet Tank
8
Drain outlet Water inlet
(2)
(1)
(1)
(2)
(3)