Philips AUT3268 User Manual page 7

Slide the nut of the three-way ball valve onto the 1/4" PE pipe and insert the pipe into the
opening of the three-way ball valve. Tighten the nut with a wrench.
c. Install the three-way ball valve on the cold water valve.
Please don't miss the gasket inside the three-way ball valve
during installation.
d. Connect the cold water hose with the three-way ball valve
and screw it tightly with a wrench. Please don't miss the
gasket in the cold water hose during installation.
e. Switch off the three-way ball valve.
Turn on the cold water supply. Wipe the connections with
a tissue to see if there is leakage. If the tissue stays dry, it
means the three-way ball valve is installed properly.
5
(1)
Gasket
(1)
(2)
Gasket
Hot
(2)
(2)
Cold
(1)