Install The Three-Way Ball Valve - Philips AUT3268 User Manual

- The installation process should be carried out under appropriate hygienic conditions,
taking all necessary precautions concerning materials and components that will come
into contact with water to be treated or consumed.
- Avoid external contamination of the system through improper handling, using gloves,
sanitizing gel, and washing hands as often as is necessary during the installation process,
�rst use, and system maintenance.
- The system and installation shall comply with applicable local regulations.
- This product cannot be disposed of with other domestic waste products.
At the end of the product's service life, it should be returned to the place of purchase,
or at a local recycling center, indicating that it contains electric and electronic
components. The appropriate collection and treatment of the product, which
no longer are to be used, contributes to the preservation of natural resources
and avoids any potential public health risks.

1. Install the three-way ball valve

a. Turn off the cold water supply. Turn on the kitchen cold water faucet to release the
pressure and allow water to drain from the line. Disconnect the cold water hose from the
cold water valve.
Hot
b. Measure the length of the 1/4" pipe and cut it accordingly with a pipe cutter.
Cold
Cold
(1)
(2)
4