Water Temperature - Philips WP3861 User Manual

performance. When you start using the water purifier again, let
the water run at the filtered setting for 1 minute before use. If the
filter cartridge emits an unpleasant smell, replace it with a new one.

Water temperature

- Do not let water hotter than 65°C run through the water purifier at
the unfiltered setting or hotter than 50°C at the filtered setting.
This may damage the appliance.
- Do not let the water purifier freeze.
applications
- Only use the appliance to filter water that meets drinking water
standards.
- Do not block the filtered water outlet or connect other devices to it.
- If the water pressure is very high, reduce the water flow of the tap to
prevent damage to the cartridge.
- Keep the water purifier away from heat to avoid distortion or
breakage.
- Do not tamper with the water purifier.
- This appliance does not soften water.
- Do not use filtered water in aquariums. Tap water, filtered or
unfiltered, can be harmful to fish.
- We advise you to boil the filtered water before you drink it.
Features
- The water purifier removes chlorine, unpleasant smells and tastes, as
well as large sediments from your tap water.
- The silver-coated activated carbon prevents bacteria growth inside
the filter.
- The replacement reminder sticker helps you remember when to
replace the filter cartridge.
- The 2ltrs/min high-speed initial flow rate gives you plenty of clean
water instantly.
- The water selection lever offers you a choice of three water flow
types: unfiltered spray, unfiltered stream or filtered spray.
4222.002.6611.2.indd 7
English

06-09-2006 14:34:25