Technical Specifications Of The Scalance Xc208 - Siemens SIMATIC NET SCALANCE XC-200 Series Operating Instructions Manual

Technical specifications
Signaling contact
1)
Permitted ambient conditions
Ambient temperature
3)
Relative humidity
Housing, dimensions and weight
Design
Housing material
Degree of protection
Dimensions (W x H x D)
Weight
Installation options
Mean time between failure (MTBF)
MTBF (EN/IEC 61709; 40 °C)
Note the wiring rules (Page 51).
1)
Detected with the SFP992-1ELH. You will find the precise values in the operating instructions
2)
of the pluggable transceivers, see the section "Introduction" Additional documentation
(Page 5).
Depending on which pluggable transceiver you use, the maximum ambient temperature can
3)
change, see section "Accessories", Pluggable transceivers SFP (Page 18)".
7.4

Technical specifications of the SCALANCE XC208

The following technical specifications apply to the SCALANCE XC208.
Technical specifications
Attachment to Industrial Ethernet
Electrical connectors
Diagnostics interface
SCALANCE XC-200
Operating Instructions, 12/2017, C79000-G8976-C442-03
7.4 Technical specifications of the SCALANCE XC208
Quantity
Design
Permitted voltage range
Load capability
During operation up to 2000 m
During storage
During transportation
During operation at 25 ℃
compact
Basic housing
Front cover
IP20
60 x 145 x 125 mm
520 g
● Wall mounting
● Installation on a DIN rail
● Mounting on an S7-300 standard rail
● Mounting on an S7-1500 standard rail
> 47 years
Quantity
Connector
Properties
Transmission speed
Technical specifications
1
Terminal block, 2 terminals
24 VDC
max. 100 mA
-40 °C to +70 °C
-40 ℃ to +85 ℃
-40 ℃ to +85 ℃
≤ 95 % no condensation
Die cast aluminum, powder coated
Polycarbonate (PC-GF10)
8
RJ-45 jack
Half/full duplex, MDI‑X pinning
10 / 100 Mbps
63