Chassis Components; Storage Drives; Hard Drive Carrier Indicators - Supermicro SuperStorage Server SSG-6049SP-E1CR60 User Manual

SuperStorage Server SSG-6049SP-E1CR60/90 User's Manual

3.5 Chassis Components

Storage Drives

The SSG-6049SP-E1CR60 supports 60 3.5" hard drives and the SSG-6049SP-E1CR90
supports 90 3.5" hard drives. The drives can be removed without powering down the system if
your operating system supports RAID. In addition, both servers support two 2.5" SATA drives
and (optional) four U.2 NVME drives at the rear of the chassis.

Hard Drive Carrier Indicators

Each hard drive carrier has two LED indicators: an activity indicator and a status indicator.
The status indicator functions in RAID configurations. For non-RAID configurations, it remains
off. See the table below for details.
Color
Activity Blue
LED
Blue
Blue
Status
Red
LED
Red
Red
Red
Red
Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and
servers. For information on recommended HDDs, visit the Supermicro website and check the
"Drive Options" in the product webpage.
Hard Drive Carrier LED Indicators
Blinking Pattern Behavior for Device
Solid on Indicates a SAS drive
Off Indicates a SATA drive
Blinking Drive is actively being accessed
Solid on Drive failed
Blinking at 1Hz RAID is rebuilding
Blinking at 3Hz Indicates a hot spare
Blinking at 4Hz Locates a drive
Off Idle
Drive Carrier LEDs
Figure 3-6. Hard Drive Carrier Indicators
48