Technical Information
5.4.4
Inner Burner Main Jet
1. Refer to figure 5-11
2. Access the Jets(s) (5.4.1)
3. Unscrew the Tube Fitting (Item 3) from the
4. Connector (Item 2).
5. Remove the Connector (Item 2) from Air Intake Adjustment
Sleeve Fitting (Item 1)
6. Remove the Jet (Item 4) from the Connector (Item 2)
7. Install the new Jet (Item 4).
8. Re-assemble the Fittings and Connectors.
9. Perform the Inner Burner Air Intake Adjustment (5.4.5)
10. Check for leaks – resolve as necessary.
Figure 5-11: Inner Burner Jets and Components
KM400 Series Combi-Sets
40