Simmer Adjustment Jet - Miele KM400 Series Technical Information

KM400 Series Combi-Sets
5.3.2

Simmer Adjustment Jet

1. Shut off the electrical supply to the appliance.
2. Disconnect the electrical supply connection / plug.
3. Close the valve on the gas supply line to the appliance.
4. Access the underside of the appliance.
5. Unscrew the Simmer Adjustment Jet(s) from the openings in the
base of the appliance (Figure 5-8, Item 1).
6. Use needle-nose pliers to grasp the jet(s) to remove it from the
appliance.
7. Insert new jet(s) using needle-node pliers.
8. Tighten the jets using a screwdriver.
9. Restore the gas.
10. Check for leaks – resolve as necessary.
11. Restore the electric.
Figure 5-8: KM404 Simmer Adjustment Jets
37
Technical Information