Service And Maintenance; Combi-Set - Removal For Service - Miele KM400 Series Technical Information

KM400 Series Combi-Sets
5.0

Service and Maintenance

Warning!
Service and repair work should only be performed by qualified
personnel; in accordance with all applicable regulations.
The appliance must be disconnected from the main power
supply (i.e. unplugged, circuit breaker shut off) before any
service work is performed.
The gas supply to the appliance must be shut off before
performing any service on the KM404 and KM406.
After service all gas connections should be checked to ensure
they do not leak. Resolve as necessary before any operation.
Where applicable by law; gas connections must be performed
by qualified / licensed personnel.
5.1 Combi-Set – Removal for Service
Two styles of mounting are used on KM400 Series Combi-Sets.
Retaining Clips
Table 5-1: Mounting Information for Combi-Sets
Mounting
Style
(Figure 5-1)
Brackets
(Figure 5-3)
31
Technical Information
Combi-Set Model Number
KM400
KM402
KM408
KM 410 / KM411
KM404
KM406