Bracket Style Mounting - Miele KM400 Series Technical Information

KM400 Series Combi-Sets
5.1.2

Bracket Style Mounting

Figure 5-3: Bracket Style Mounting used on KM404 and KM406
Removal Procedure
1. Shut off the electrical supply to the appliance (i.e. shut off the
circuit breaker).
2. Disconnect the electrical supply.
3. Close the valve on the gas supply line to the appliance.
4. Disconnect the gas line from the appliance.
5. Access the underside of the appliance; remove the screws that
secure the appliance to the mounting bracket.
6. Push upwards on the bottom of the appliance to remove from
the counter.
Note:
During re-installation all gas connections must be leaked tested
before reconnecting the electric supply.
33
Technical Information