•
Replace the top immediately if damaged by
etching, scratching or chipping. A damaged
top can break in use.
•
Do not use metal foil on hot plate which may
block air flow. Overheating will result.
•
Check and tighten the removable cord
periodically making sure it is secure. If
loosened, the cord could become hot and/or
spark and be a potential fire hazard. If cord
appears damaged, replace immediately. If
cord is repeatedly loosened it is
recommended to purchase the power cord.
•
Do not remove or modify grounded power
plug. Use only properly grounded outlets to
avoid shock hazard.
•
Use appropriate hand and eye protection
when handling hazardous chemicals.
•
Gross weight of items placed on top of hot
plates should not exceed 35 lbs (15.9 kg) on
"
the 10
x 10
"
the 7
x 7
•
"Caution Hot Top. Avoid Contact." The top
plate of the unit can remain hot for some time
after use. A "CAUTION-HOT TOP" light will
remain on until top plate temperature cools to
below 50°C.
•
Do not leave an active probe out of the fluid.
This may cause uncontrolled heating of the
fluid on the hot plate and unintentional boiling
or an explosion could occur.
•
Localized heater element temperature can be
significantly higher than the temperature
indicated on the display. If flammable
concentrations reach internal element, a fire
could result.
•
Note that the exterior housing will be hot
during and for a period of time after use.
•
Refer servicing to qualified personnel.
Hot Plates, Stirrers and Stirring Hotplates
"
models and 25 lbs (11.3 kg) on
"
models.
Safety Information |
3