Table of Contents
Advertisement
Phantom 3R Hybrid
Static Gobo Wheel + Rotating Gobo Wheel + Color Wheel
Rotating gobo wheel
Static gobo wheel
Color wheel
Fig. 14
Troubleshooting
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
No Light
If the light effect does not operate properly, refer servicing to a technician.
Suspect three potential problem areas as: the power supply, the lamp, the fuse.
01) Power supply. Check if the unit is plugged into an appropriate power supply.
02) The lamp. Replace the lamp. See pages 7-8 for installing the lamp.
03) The fuse. Replace the fuse. See page 27 for replacing the fuse.
04) If all of the above appears to be O.K., plug the unit in again.
05) If you are unable to determine the cause of the problem, do not open the Phantom, as this may
damage the unit and the warranty will become void.
06) Return the device to your Showtec dealer.
Ordercode: 40074
29
Advertisement
Table of Contents
