Resetting The System Settings - Xylem SL Analytics Lab 865 Operating Manual

Settings
44
Setting
Resolution pH
Resolution mV
Asymmetry
Slope
Man. temperature
One point calibration
Stability control
Temperature unit
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open it, press the <F1>/[Menu] or
<ENTER> key in the measured value display.

7.4.2 Resetting the system settings

The following system settings can be reset to the default condition:
Setting
Language
Beep
Baud rate
Output format
Contrast
Illumination
Switchoff time
The system settings are reset in the menu, Storage & config / System / Reset.
To open the Storage & config menu, press the <F1__>[Menu] key in the
measured value display.
Default settings
0.001
0.1
0 mV
-59.2 mV
25 °C
No
On
°C
Default settings
English
On
4800 Baud
ASCII
50 %
Auto
1 h
Lab 865
ba77145e02 12/2017