Measurement Data Storage; Editing The Measured Value Storage - Xylem SL Analytics Lab 865 Operating Manual

Data storage
Terminating the
automatic storage
function prema-
turely
Editing the data stor-
age
48
automatic storage of measurement data (such as the display). By pressing any
key the energy saving mode is switched off again.
Proceed as follows to switch off the automatic storage function before the
adjusted storage duration has expired:
1. Press the <STO__> key.
The following window appears.
Warning
Stop automatic storage?
Yes
No
01.02.2014
Back
2. Using <><>, select Yes and confirm with <ENTER>.
The meter switches to the measured value display.
The automatic storage function is terminated.
8.3

Measurement data storage

8.3.1 Editing the measured value storage

The contents of the manual or automatic measurement data storage can be
shown on the display and output to the interface.
Each of the measurement data storages has a function to erase the entire
contents.
The storage is edited in the menu, Storage & config / Data storage. To open
the Storage & config menu, press the <F1__>[Menu] key in the measured
value display.
Open the manual or automatic storage directly with the <RCL> or <RCL__>
key.
The settings are explained here using the manual storage as an
example. The same settings and functions are available for the
automatic storage.
08:00
Lab 865
ba77145e02 12/2017