Daikin MC80ZVM Operation Manual page 38

Troubleshooting
Troubleshooting
The values of humidity and
temperature indicated on the unit
differ from other hygrometers and
thermometers
 Wireless LAN connection
Phenomenon
The unit (air purifi er) can't be found
with the app
Cannot operate the unit with
smartphone even though the
Communication lamp is lit green.
 Other
Phenomenon
The unit turns on and off on its own.
The fan stops midway through unit
operation
The sound of Streamer discharge
can no longer be heard
There is interference on our TV
screen
Noise is generated on the radio
Just inserting the power supply plug
causes operation to start
37
The display on the unit may differ from that of the other hygrometers or
thermometers.
• This is because the humidity and temperature become uneven even in the
same room due to the fl ow of air.
Please use the AIR MONITOR indicator as a rough estimate.
• Perform connection settings again
• Move the router closer to the air purifi er.
• Check the internet connection of your router.
• Is someone else operating the unit with a smartphone?
• Did you set the schedule timer using "ONECTA"?
 If
is pressed on the unit, the Communication lamp will turn off,
and operation via smartphone and the schedule timer will be disabled.
• When the unit switches to Monitoring mode during operation in ECONO
MODE, the fan turns on and off repeatedly.
• Are the pre-fi lters, fi lter fi xing unit, and dust collection fi lter attached
before the unit is operated?
The fan is confi gured to stop in order to protect electrical components
if a part is not properly attached.
 If a part is not attached, unplug the unit and attach all the parts before
turning the unit on again.
• Depending on the degree of air impurity, Streamer operation may turn OFF.
• Is Streamer output set to Low?
• Is the TV or radio positioned within 2m of the unit, or is an indoor
antenna positioned near the unit?
• Are the power supply cord or antenna cable of the TV or radio routed
near the unit?
 Keep the unit as far as possible from the TV, radio or antenna.
• Did you disconnect the power supply plug during a power failure or
when a sudden voltage fl uctuation occurred? Or did you stop the unit
by disconnecting the power supply plug during the last operation?
 The auto-restart function automatically resumes operation.
Check points
►Page 16,17
Check points
►Page 20
►Page 21, 22
►Page 22