Table of Contents
Advertisement
Advanced Settings
Changing the setting
Function
Active Plasma Ion
output (ON/OFF)
Setting at time of
purchase: ON
If the odour of ozone bothers
you, set Active Plasma Ion
output to OFF.
• If turned off, Active Plasma Ion
is not discharged but dust and
odour can be removed.
• If the odour of ozone continues
to bother you even after output
has been set to OFF, set
Streamer output to Low.
PM2.5 sensor
sensitivity
(Low/Normal/High)
Setting at time of
purchase: Normal
PM2.5 sensor sensitivity can
be set to Low, Normal, High.
• Low means sensor is less
responsive and High means
the sensor is more responsive.
23
Can be performed either during
operation or while operation is
stopped.
Hold down
for about 5 seconds
and when a short beep sounds,
press
while continuing to
hold down
.
Release both
and
when a short beep sounds.
Can be performed either during
operation or while operation is
stopped.
Press
for about 5 seconds and
when a short beep sounds, press
while continuing to hold
FAN
down
.
Release both
and
FAN
when a short beep sounds.
1
CIRCULATOR MODE lamp will light up after
blinking.
Blinking
Lit up
According to the current setting, the FAN lamp
will turn from blinking to lit up.
Normal
A short beep sounds and the FAN lamp will
turn from blinking to lit up according to the
current setting.
Low
Normal
Low
High
Advertisement
Table of Contents
