Daikin MC80ZVM Operation Manual page 27

2
Press to change the setting*
Each press cycles between ON and OFF.
Lit up
ON
Press to change the setting*
MODE
The airfl ow rate switches between 4 Levels
and 3 Levels with each press.
Unlit
4 Levels
* If the lamps do not change even after the settings were changed, unplug the unit, wait at least 5 seconds, then re-insert the power supply plug
and repeat the above procedure from the beginning.
Press
A short beep sounds, the FAN
lamp (Quiet) blinks, and the
ECONO MODE lamp changes to
the following display according to
Unlit
OFF
the setting.
Press
A short beep sounds, AUTO FAN
MODE lamp blinks, and the FAN
lamp changes as below
according to the new setting.
Lit up
3 Levels
3
MODE
Blinking
Blinking Unlit
ON OFF
Blinking
Unlit Lit up
4 Levels 3 Levels
Advanced Settings
4
While the lamp is blinking,
unplug the power supply plug,
wait at least 5 seconds, and
then insert the power supply
plug again.
Setting is now complete.
Power supply plug
Power
socket
• If this procedure is not
performed, the unit will not
return to the regular operation
mode.
• Settings are remembered
even if the unit is unplugged.
26