Daikin MC80ZVM Operation Manual page 11

AIR MONITOR indicator [white] (estimate values)
Indicates what setting is selected with
• µg/m 3
(PM2.5 concentration)
Displays the concentration of PM2.5 in the room in the range of 0 to 99 µg/m
If the concentration exceeds 99µg/m
• [– –] is displayed for about 1 minute immediately after operation start regardless of the PM2.5 concentration.
• °C (current indoor temperature)
Displays the current room temperature in the range of 0°C to 39°C. (Steps of 1°C)
When the temperature is below 0°C, "0" is displayed. When the temperature is above 39°C, "39" is displayed.
• [– –] is displayed for about 30 seconds immediately after operation start regardless of the indoor temperature.
• % (current indoor humidity)
Displays the room humidity in the range of 20% to 90%. (Steps of 1%)
When the humidity level is below 20%, "20" is displayed. When the humidity level is above 90%, "90" is displayed.
• [– –] is displayed for about 30 seconds immediately after operation start regardless of the indoor humidity.
Odour sensor lamp
Indicates the intensity of odours in 3 colours: Blue, Orange and Red.
• Blue indicates that the air is clean.
Blue Orange
Lamp colour
Odours Low
• After operation is started, the lamp will light blue for the fi rst
minute (approx.) regardless of odour level.
• If odour intensity levels are unchanging, the sensor may not
respond even if there is a strong odour in the air.
• The sensor may not respond to some odours such as pet odours
(excluding ammonia), garlic odour, etc.
to display. (Settings at time of purchase : µg/m
3
, "HI" is displayed.
Red
High
3
)
3 3
. (Steps of 1 µg/m )
• As odour perception varies by person, in some cases an odour
may be sensed even when the lamp is Blue.
If the odour bothers you, switch to manual airfl ow rate, and select a
high airfl ow rate. ►Page 19
The basic sensitivity of the odour sensor will be determined by
odour levels in the fi rst minute (approx.) after the power supply
plug is inserted. Insert the power supply plug when the air is
clean (odour-free).
Odour sensor detection range
Detectable matter
tobacco odours, cooking odours, pet odours, toilet smells,
waste smells, mould odours, sprays, alcohol
Sometimes detectable
sudden changes in temperature/humidity, steam, oil smoke,
gas emitted from combustion-based heating devices
Read First
The display on the unit may
differ from that of the other
hygrometers or thermometers.
• This is because the humidity,
temperature and volume of
PM2.5 become uneven even
in the same room due to the
fl ow of air. Please use the Air
monitor indicator as a rough
estimate.
States of the AIR MONITOR
indicator and their meanings
►Page 32
10