Daikin MC80ZVM Operation Manual page 25

2
Press to change the setting*
Each press cycles between ON and OFF.
Normal
Press to change the setting*
Each press cycles between Low, Normal, High.
Low Normal
* If the lamps do not change even after the settings were changed, unplug the unit, wait at least 5 seconds, then re-insert the power supply plug
and repeat the above procedure from the beginning.
Press
A short beep sounds with the
CIRCULATOR MODE lamp
blinking while the FAN lamp
blinks according to the new
setting.
Low
Press
A short beep sounds and the
FAN lamp blinks according to the
new setting.
High
Low
3
Blinking
Normal Low
FAN
Normal High
Advanced Settings
4
While the lamp is blinking,
unplug the power supply plug,
wait at least 5 seconds, and
then insert the power supply
plug again.
Setting is now complete.
Power supply plug
Power
socket
• If this procedure is not
performed, the unit will not
return to the regular operation
mode.
• Settings are remembered
even if the unit is unplugged.
24