Table of Contents
Advertisement
Advanced Settings
If the hissing sound generated by the streamer discharge or the odour of ozone
bothers you
Streamer Output Settings
Setting procedures
Hold down
and
unit turned off.
• Each time
and
[When the setting is changed to Low]
A short beep sounds and the streamer lamp blinks for about 5 seconds.
[When the setting is changed to Regular]
A short beep sounds and the streamer lamp lights up for about 5 seconds.
„ Operation status of streamer
Streamer output setting
FAN/MODE setting
Quiet, Low
FAN
AUTO FAN, ANTI-POLLEN,
MODE
• The streamer lamp turns off when streamer operation is OFF.
Note
• It is recommended that the streamer be set to Regular as deodorising capacity is reduced when set to Low.
• Settings are remembered even if the unit is unplugged.
When you want to turn off active plasma ion output
Active Plasma Ion Output Settings
Setting procedures
Remote controller
Hold down
and
unit turned off.
• Each time
and
[When the setting is changed to OFF]
A short beep sounds and the dust lamp, PM2.5 lamp, and odour sensor lamp blink
green for about 5 seconds.
[When the setting is changed to ON]
A short beep sounds and the dust lamp, PM2.5 lamp, and odour sensor lamp light up
green for about 5 seconds.
Note
• Settings are remembered even if the unit is unplugged.
• If set to OFF, active plasma ion discharge stops, however, dust and odour removal continues.
• If the odour of ozone bothers you, set active plasma ion output to OFF.
• If the odour of ozone continues to bother you even after output has been set to OFF, set streamer output to Low.
Remote controller
for about 3 seconds with the power supply plug inserted and the
are held down for about 3 seconds, the setting switches between Regular and Low.
Regular
ON–OFF*
Standard
Turbo
ON
MOIST
ON–OFF*
ECONO
for about 3 seconds with the power supply plug inserted and the
are held down for about 3 seconds, the setting switches between ON and OFF.
Low
OFF
ON–OFF*
*The streamer operation status ON–OFF
ON
means that the streamer turns ON and OFF
ON–OFF*
automatically depending on the degree of air
impurity and FAN setting.
OFF
Advanced Settings
*Setting at time of purchase
Regular*
Low
Blinking
Lit up
*Setting at time of purchase
ON*
OFF
ON*
OFF
Blinking
Lit up
20
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
