Dvb-T/T2 Installation; Dvb-C Installation - Strong SRT 32HA3003 User Manual

Service Type
It is recommended to use the default settings.
NOTE:

3.2 DVB-T/T2 installation

Terrestrial Setting
Here you only need to press OK to start searching.
All settings are automatically set by country selection you made in rst step.
NOTE:

3.3 DVB-C installation

Cable Setting
Press    to highlight your settings.
Scan type
NOTE:
Network ID
Frequency
Symbol
NOTE:
Press OK to continue and to start search process.
Crypted
Press    to highlight the country that you want to install, then press OK to start searching.
If all went well with auto channel installation, your TV will start to play on rst channel.
We hope you will enjoy it for many years.
8
Select DTV to search Digital TV channels only, RADIO to search radio channels
only or All for a complete search.
For users in Germany, who use the ASTRA 19.2E satellite to watch their
favourite Free-To-Air programmes, only press the GREEN button to load the
pre-installed channel list and start watching directly.
If you have an active antenna, please check the user manual of the antenna
for external power supply. The TV can NOT supply power used for an active
antenna.
You can select Network Scan or Full. (Default Network Scan for quick search
advised).
Full scan will have a duration of approximately 20 minutes, depending on
your cable network.
Please enter (with 0 ~ 9) the used Network ID from your provider.
Please enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)
Please check the settings for your cable system used by your provider!
Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and encrypted channels