Chapter 4
Modules
a
Refer to details for a list of compatible SFPs.
Precision Time Protocol (PTP) Modules
RUGGEDCOM RMM2431-5PTP
Blank Modules
RUGGEDCOM RMM2431-2
RUGGEDCOM RMM2431-4
Section 4.2
Installing/Removing Line Modules
Upon installing a new line module in the device, all features associated with the module are available in
RUGGEDCOM ROS-F. For more information, refer to the RUGGEDCOM ROS-F User Guide for the RUGGEDCOM
RSG2488F.
Once a line module is removed, all the features associated with the module are hidden or disabled in RUGGEDCOM
ROS-F.
IMPORTANT!
Only one Precision Time Protocol (PTP) line module is supported per chassis.
CAUTION!
Contamination hazard – risk of equipment damage. Prevent the ingress of water, dirts and other debris
that may lead to premature equipment failure. Always make sure slots are not left empty and open
ports are protected with plugs or covers.
30
SFP Included: RUGGEDCOM
SFP1132-1LX70
Specifications
Ports: 5
Protocols: PTP and NTP
Synchronization Sources: NTP,
IEEE 1588 v2, IRIG-B PWM, GPS
Port Type: BNC
Specifications
—
Specifications
—
RUGGEDCOM RSG2488F
Installation Guide
Article Numbers
6GK6000-8PT01-4EA0
(Standard)
6GK6000-8PT01-4EA1
(Conformal Coated)
Article Numbers
6GK6000-8AA00-2EA0
(Standard)
6GK6000-8AA00-2EA1
(Conformal Coated)
Article Numbers
6GK6000-8AA00-4EA0
(Standard)
6GK6000-8AA00-4EA1
(Conformal Coated)
Installing/Removing Line Modules