Siemens RUGGEDCOM RSG2488F Installation Manual page 44

Chapter 4
Modules
1
Figure 22: Installing a Power Module
1. Screws 2. Power Supply 3. Chassis
3. Hand-tighten the screws to secure the power module to the chassis.
4. Turn on power to the device and confirm the module is receiving and supplying power. This is indicated by
the LEDs on the module.
LED
O
I
34
2
State
Green The module is supplying power
Green The module is receiving power
3
Description
Installing/Removing Power Modules
RUGGEDCOM RSG2488F
Installation Guide