Gorenje GFACM20S Instruction Manual page 150

INSTRUCTION MANUAL
Problem
Coffee comes out slowly or comes
out drip by drip.
The machine can not be
activated.
The brewer can not be
removed.
The milk foam is too large or
sprays from the milk outlet.
Cause
The type of coffee bean
used is wrong.
The coffee is ground too
finely ground coffee is too
fine.
The power plug is not
firmly in the socket/outlet.
The power source is not
connected correctly.
The on/off button is not
turned on.
The machine is not turned
off correctly.
The brewer is blocked.
The milk is not cold
enough or the milk used is
not suitable for frothing.
The milk frother is too dirty.
28
150
Solution
Use the coffee beans which are suitable for
brewing espresso.
Turn the grind setting knob anticlockwise to
select the proper setting.
Connect the power plug firmly to the
power mains and the power socket on the
appliance.
Connect the power source of the machine.
Turn on the on/off button.
Turn off the machine and then turn it on
again to reset the brewer. Please contact
the after-sales department if the problem
cannot be solved.
Contact the after-sales department.
We recommend using milk at a temperature
of 5–10 C, and with protein content of at
o
least 3%.
Clean the milk frother.
EN