Gorenje GFACM20S Instruction Manual page 135

1x
2x
Brew Latte
1. Place a coffee cup under the coffee outlet.
2. Fill the milk tank with appropriate amount of cold milk.
NOTE: After the "Latte" function is conducted, the
overheating protection mechanism for the boiler will be
activated. If you want to use the "Hot water" function, leave
the appliance to rest for about 3–5 minutes. Then, the "Hot
water" function can be activated.
**
(1) We recommend using milk at a temperature of 5–10
and with protein content of at least 3%.
(2) Pure the milk into the milk tank, but do not exceed the
"MAX" mark on the milk tank.
3. Insert the milk tube, making sure it is firmly in place.
4. Remove the silicone tube from the milk tank lid and connect
it to the milk frother and milk tank lid.
5. Press the Latte key " " and hold it for at least 0.2 second.
The appliance will start to brew latte.
6. When your latte is brewed, the appliance will automatically
enter the standby mode.
7. Press the Latte key " " and hold it for at least 0.1 second
again if you wish to cancel the current function.
NOTES:
1. After each use, if there is still milk in the milk tank, please
store it in the refrigerator, but the silicone tube and milk
frother should be cleaned as soon as possible.
2. We recommend to use a tall cup to prevent the frothed milk
from spilling over or splashing.
(1) Remove the silicone tube and rinse it with tap water.
(2) Remove the coffee outlet cover and rinse it with tap water.
(3) Remove the milk frother and rinse it with tap water.
(4) After cleaning, replace all parts, making sure they are firmly
in place.
3. After each use, please repeat the above operation if there is
no milk in the milk tank.
(1) Rinse the milk tank with tap water.
(2) Remove the milk tank and rinse it with tap water.
(3) Remove the milk tube and rinse it with tap water.
13
135
C,
o