Gorenje GFACM20S Instruction Manual page 149

The Single cup Espresso "
and Warning indicators "
flash at the same time.
The Hot water indicator "
flashes.
The No bean indicator "
Warning indicator "
the same time.
The Hot water indicator "
and Warning indicator "
at the same time.
The Latte indicator "
dicator
Warning indicator "
the same time.
r
The crema is not rich.
o
so
Problem
" The grinding motor does not
" work normally.
" The overheating
protection mechanism for
the boiler is activated.
" and The appliance has
" flash at performed 16 consecutive
bean grinding cycles, and
the time for each grinding
was shorter than 5 minutes.
The grinding has to cool
down for 5 minutes. During
this time, all functions are
inactive.
" The flow meter has no
" flash signal, and the water-
dispensing is abnormal.
" and The switch element has
" flash at no signal and the brewing
motor does not work
normally.
The ground coffee is too
coarse.
Cause
1. Turn off the appliance and restart it.
2. Please contact the service
department if the problem can not be
solved.
1. If you wish to use the "Hot water"
function, wait for the appliance to cool
down for 3–5 minutes. Then, the "Hot
water" function can be activated.
1. The appliance will rest for 5 minutes.
Alternatively, turn off the appliance and
restart it.
2. Please, contact the service
department if the problem cannot be
solved.
1. Fill the water tank with water.
2. Please contact the service
department if the problem cannot be
solved.
1. Turn off the appliance and restart it.
2. Please contact the service department
if the problem cannot be solved.
Turn the grind setting knob clockwise
to select the proper setting.
27
149
Solution