Gorenje GFACM20S Instruction Manual page 137

1x
2x
Manual froth
*
After the "Manual froth" function is used, the overheating
protection mechanism for the boiler will be activated. If you
have to use the "Hot water" function, leave the appliance to
rest for about 3-5 minutes. Then, the "Hot water" function can
be activated.
1. Place a milk container under the coffee outlet.
NOTE: The capacity of the milk container should be more
than 160ml.
2. Fill the milk reservoir with appropriate amount of cold milk.
**
(1) We recommend using milk at a temperature of 5–10
and with protein content of at least 3%.
(2) The milk filled in the milk tank should not exceed the
"MAX" mark on the milk tank.
3. Press the Manual froth key "
0.2 second. The appliance will start to conduct the manual
froth function.
4. When the milk frothing process is completed, the appliance
automatically enters the standby mode.
5. Press the Manual froth key "
0.1 second again if you wish to cancel the current function.
NOTES:
1. After each use, if there is still milk in the milk tank, please
store it in the refrigerator, but the silicone tube and milk
frother should be cleaned as soon as possible.
2. We recommend using a tall cup to prevent the frothed milk
from spilling over or splashing.
(1) Remove the silicone tube and rinse it with tap water.
(2) Remove the coffee outlet cover and rinse it with tap water.
(3) Remove the milk frother and rinse it with tap water.
(4) After cleaning, replace all parts, making sure they are firmly
in place.
3. After each use, please repeat the above operation if there is
no milk in the milk tank.
(1) Rinse the milk tank with tap water.
(2) Remove the milk tank and rinse it with tap water.
(3) Remove the milk tube and rinse it with tap water.
15
137
o C
" and hold it for at least
" and hold it for at least