INSTRUCTION MANUAL
1x
2x
Make hot water
1. Place a cup under the coffee outlet.
NOTE: The capacity of the cup should be more than 120ml.
2. Check and make sure the plug of the milk frother is closed
tightly.
3. Press the Hot water "
0.2 second. The appliance will start to make hot water.
4. When hot water is ready, the appliance automatically enters
the standby mode.
5. Press the Hot water key "
0.1 second again if you wish to cancel the current function.
CAUTION!
Please do not touch the water container with your hands while
the appliance is heating up water. Please be careful when
removing the cup to prevent any burns as there will be still a
little hot steam dispensed from the coffee outlet when water
heating is completed.
14
136
" key and hold it for at least
" and hold it for at least
EN