Add Revised Dual-Bus Program Blocks; Add Saved Dual-Bus Program Blocks - Emerson PACSystems RX3i Application Manual

Application Guide
GFK-2928C

Add Revised Dual-Bus Program Blocks

6.6
In the Toolchest window, click on DualBus and expand the drawer so that the individual
folder items are visible. While depressing the Ctrl key, drag the following items from the
Toolchest's DualBus folders into Logic||Program Blocks for the PLC target. Please make
certain that the items are added in the proper order:
Group03 – LDs
Block
ALM_DEV
EXE_CR
Note:
Group04 – LDs
Block
DB_SVCS
SW_BSM
AUTO_SW
Group05 – LDs
Block
DBUS
6.7

Add Saved Dual-Bus Program Blocks

In the Toolchest window, click on SavedDBus and expand the drawer so that the individual
folder items are visible. While depressing the Ctrl key, drag the following items from the
Toolchest's SavedDBus folders into Logic||Program Blocks for the PLC target. Please make
certain that the items are added in the proper order:
Bus Configuration Blocks:
Block
INIT_GB00
INIT_GB01..nn3
Top Level Block:
Block
BUSSES
Updating from a Previous Release
e. ALM_DEV
f. EXE_CR
g. fc_ai
h. fc_di
Variable Name Entry
DEV
CR01
The blocks fc_ai and fc_di have been eliminated and are no longer used.
Variable Name Entry
DBS
SW01
Aut_Sw
Variable Name Entry
DB00
Variable Name Entry
IGB00
IGB01..nn
Variable Name Entry
IGB00
Chapter 6
Oct 2019
31