Add Toolchest Items To Your Project; Place Into User Defined Types - Emerson PACSystems RX3i Application Manual

Application Guide
GFK-2928C
Figure 7: Select Toolchest Drawer File to Import
The Toolchest now contains the DualBus drawer. Using the dropdown text box, click on
DualBus. Expand the drawer so that the individual folder items are visible as shown below:
Figure 8: Folders in DualBus Drawer
4.1

Add Toolchest items to your project

While depressing the Ctrl key, drag the following items from the Toolchest's DualBus folders
into the PLC target. Please make certain that the items are added in the proper order:

Place into User Defined Types

Group01 – UDTs
Group02 – UDTs
Toolchest Components
• GCG
• G_Device
• G_Bus
Chapter 4
Oct 2019
10