Head Position Memorization; Recall The Head Position; Delete The Memorized Position - Hunter TCA34R Series Operation Instructions Manual

2.7 Head position memorization

Head position memorization

Recall the head position

Delete the memorized position

26 • • • • Basic Procedures
Place the mount/demount head next to rim edge.
Press the memorization push-button and keep it pressed until it lights up.
Press the memorization push-button to let the mount/demount head place automatically
on the rim edge in the previously memorized position. During the mount/demount head
repositioning, the memorization push-button flashes. Once the position has been reached,
the button returns to fixed light.
NOTE: The memorization of the tool position is only for the vertical
direction. In case the tool has been repositioned horizontally,
pressing the recall button may cause the tool head to drop
onto the wheel.
Keep the memorization button pressed until it turns off.
TCA34R Series Changer Operation Instructions