Table of Contents
Advertisement
2.
BASIC PROCEDURES
2.1 Placing Wheel on TC
Wheel Support Plate Height Adjustment
The wheel support plate on the TC is height adjustable to allow a wide range of
wheels to be serviced.
Use the highest setting for most high offset wheels.
Standard wheels typically use the middle height.
Use the lowest height for most reverse drop-center wheels.
To adjust center support height, pull the knob outwards on center support and raise or
lower center support table to desired height.
LOCK/UNLOCK
KNOB
12 • • • • Basic Procedures
TCA34R Series Changer Operation Instructions
Advertisement
Table of Contents
