Fade In And Fade Out - Sharp VL-ME10E Operating Manual

Useful Features
Camera Recording

Fade In and Fade Out

Available modes: TAPE-CAMERA, DUAL-
CAMERA
The fade function allows you to gradually bring
the image and sound in or out at the beginning
or end of a scene for creating scene transi-
tions. This is especially effective for indicating
a dramatic change in scenery.
Fade in
Fade out
Setting Fade Mode
1
Set the camcorder to TAPE-CAMERA or
DUAL-CAMERA mode (see page 29).
2
In Recording Standby mode, press
FADE.
AUTO AUTO AUTO
1 2 bit 1 2 bit bit
FADE FADE FADE
43
All manuals and user guides at all-guides.com
3 3 0 0 min min min
GAMMA GAMMA GAMMA SRCH SRCH SRCH
Using Fade Mode
1
Press the REC START/STOP button to
begin recording.
• The picture turns white, and the image
and sound fade in.
AUTO AUTO AUTO
1 2 bit 1 2 bit bit
3 3 0 0 min min min
FADE FADE FADE
2
Press the REC START/STOP button at
the point where you wish to stop
recording.
• The image and sound fade out as the
picture gradually turns white. The
camcorder then returns to Recording
Standby mode.
AUTO AUTO AUTO
1 2 bit 1 2 bit bit
3 3 0 0 min min min
FADE FADE FADE
To cancel Fade mode
Press FADE again.
To use Fade Out only
1
During camera recording in TAPE-
CAMERA mode, press FADE.
2
Press the REC START/STOP button at
the point where you wish to stop
recording.
Note:
• Fade mode is automatically canceled after Fade
Out.
GAMMA GAMMA GAMMA SRCH SRCH SRCH
GAMMA GAMMA GAMMA SRCH SRCH SRCH