Fade In And Fade Out - Sharp VL-Z700S Operation Manual

Fade In and Fade Out

Available mode:
Tape Camera
The fade function allows you to gradually
bring the image and sound in or out at the
beginning or end of a scene for creating
scene transitions. This is especially effective
in creating a dramatic change in scenery.
Operation button
DISPLAY/MODE
SET button
Fade in
Fade out
Using
1
In Tape Camera mode, press the
DISPLAY/MODE SET button until the
mode screen appears.
2
Press l or m on the Operation
button to select "FADE", then press
the centre of the Operation button.
F O C U S
A U T O F O C U S
B L C G A I N /
F A D E
3
Press l or m to select "ON", then
press the centre of the Operation
button.
4
5
6
Record Start/Stop
button
To cancel Fade mode
Select "OFF" in step 3 above.
To use Fade Out only
1
2
3
O F F
Note:
• Fade mode automatically cancels after Fade
Press the DISPLAY/MODE SET
button until on-screen indicators
appear.
Press the Record Start/Stop button to
begin recording.
• The picture turns white, and the
image and sound fade in.
F A D E I N F A D E I N
A U T O A U T O
3 0min 3 0min min
Press the Record Start/Stop button at
the point where you wish to stop
recording.
• The image and sound fade out as the
picture gradually turns white. The
camcorder then returns to Recording
Standby mode.
F A D E F A D E O U T O U T
A U T O A U T O
2 2 7 7min min min
During camera recording in Tape
Camera mode, press the DISPLAY/
MODE SET button until the mode
screen appears.
Perform steps 2 and 3 in "Using".
Press the Record Start/Stop button at
the point where you wish to stop
recording.
Out.
R E C R E C
R E C R E C
39