Specifications - Sharp VL-ME10E Operating Manual

Appendix

Specifications

Camcorder
Recording System: 2 rotary heads, helical scanning system
Recording/Playback Time: 90 minutes (DVM60, LP mode)
Lens Filter Diameter: 37 mm
Colour Temperature Compensation: Auto white balance with white balance lock
Minimum Illumination: 1 lux* (with gain-up, F1.8)
Video Output Level: 1.0 Vp-p 75-ohm unbalanced
Audio Output Level: –8 dBs, impedance less than 2.2 kohms
Still Image Compression System/
Recording Format: JPEG base line conformance/JPEG (Exif2.1)
Still Image Recording Medium: SD Memory Card, MultiMediaCard
Power Requirement: DC 7.4 V
Power Consumption: 3.9 W (during camera recording in TAPE-CAMERA mode using
Operating Temperature: 0°C to +40°C
Operating Humidity: 30% to 80%
Storage Temperature: –20°C to +60°C
Dimensions (approx.): 71.8 mm (W) × 86.3 mm (H) × 181.3 mm (D)
Weight (approx.): 600 g (without battery pack, lithium battery, video cassette, and
AC Adapter/Battery Charger (UADP-0321TAZZ)
Power Requirement: AC 110–240 V, 50/60 Hz
Power Consumption: 23 W
Dimensions (approx.): 69 mm (W) x 43 mm (H) x 113 mm (D)
Weight (approx.): 160 g
MultiMediaCard (Supplied Accessory)
Memory Capacity: 8 MB
Power Requirement: 3 V
Operating Temperature: 0°C to +40°C
Storage Temperature: –20°C to +60°C
Specifications are subject to change without notice.
*Minimum illumination: Since there is no widely accepted testing procedure for determining minimum
103
All manuals and user guides at all-guides.com
Signal System: PAL standard
Cassette: Digital VCR Mini DV video cassette
Tape Speed: SP mode: 18.831 mm/second
LP mode: 12.568 mm/second
Pickup Device: 1 / " (effective size: 4.5 mm) CCD image sensor (with approx.
4
800,000 pixels including optical black)
Lens: 10x optical/200x digital power zoom lens (F1.8-2.2, f = 3.6 – 36
mm), full-range auto focus
Viewfinder: Electronic LCD colour viewfinder
Monitor: 3.0 " (7.5 cm) full-colour LCD screen (TFT active matrix)
Microphone: Electret stereo microphone
Speaker Output: 300 mW
the viewfinder in Full Auto mode with the DIS function on)
4.7 W (during camera recording in TAPE-CAMERA mode using
the LCD monitor in Full Auto mode with the DIS function on and
backlight in normal mode)
card)
DC Output: 7.3 V
illumination capability, lux ratings are comparable only between models from the same
manufacturer.