D-Link NUCLIAS CONNECT DAP-2610 Manual page 43

D-Link DAP-2610 User Manual
Get IP From: Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish
to assign a static IP address to the DAP-2610. When Dynamic IP (DHCP) is selected, the other fields here will be grayed
out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made.
IP Address:
Assign a static IP address that is within the IP address range of your network.
Subnet Mask:
Enter the subnet mask. All devices in the network must share the same subnet mask.
Gateway:
Enter the IP address of the gateway/router in your network.
DNS:
Enter a DNS server IP address. This is usually the local IP address of your gateway/router.
43