Authentication Settings - Remote Radius - D-Link NUCLIAS CONNECT DAP-2610 Manual

D-Link DAP-2610 User Manual
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web authentication
page. In this window, you can view and configure the Captive Portal settings. After selecting Remote RADIUS as the authentication type, we can
configure the Remote RADIUS authentication that will be applied to each wireless client in this network.
Session timeout Enter the session timeout value here. This value can be
from 1 to 1440 minutes. By default, this value is 60 minutes.
(1-1440):
Select 2.4GHz or 5GHz.
Band:
SSID Index: Select the SSID for this authentication.
Authentication Type: Select the captive portal encryption type here. Options
to choose from are Web Redirection, Username/
Password, Passcode, Remote RADIUS, LDAP and POP3.
In this section we'll discuss the Remote RADIUS option.
Web Redirection State: Select Enable to enable the website redirection
feature.
URL Path:
Select whether to use either HTTP or HTTPS here. After
selecting either http:// or https://, enter the URL of the
website that will be used in the space provided.
IPIF Status: Select to Enable or Disable the Captive Portal with its
IP interface feature here.
VLAN Group: Enter the VLAN Group ID here.
Get IP From: Static IP (Manual) is chosen here. Choose this option
if you do not have a DHCP server in your network, or if
you wish to assign a static IP address to the DAP-2610.
When Dynamic IP (DHCP) is selected, the other fields
here will be grayed out. Please allow about 2 minutes
for the DHCP client to be functional once this selection
is made.

Authentication Settings - Remote RADIUS

48