Dhcp Server; Dynamic Pool Settings - D-Link NUCLIAS CONNECT DAP-2610 Manual

D-Link DAP-2610 User Manual
The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless
stations to receive an available IP with lease time control. If required, the DAP-2610 is capable of acting as a DHCP server.
Function Enable/Disable: Dynamic Host Configuration Protocol (DHCP) assigns
dynamic IP addresses to devices on the network. This
protocol simplifies network management and allows new
wireless devices to receive IP addresses automatically
without the need to manually assign new IP addresses.
Select Enable to allow the DAP-2610 to function as a

DHCP server.

IP Assigned From: Input the first IP address available for assignment on your
network.
IP Pool Range (1-254):
Enter the number of IP addresses available for assignment.
IP addresses are increments of the IP address specified in the
IP Assigned From field.
Subnet Mask:
All devices in the network must have the same subnet mask to communicate. Enter the subnet mask for the network
here.
Gateway: Enter the IP address of the gateway on the network.
WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
determines the IP address of a network computer that has a dynamically assigned IP address.
DNS:
Enter the IP address of the Domain Name System (DNS) server. The DNS server translates domain names such as
www.dlink.com into IP addresses.
Domain Name: Enter the domain name of the network, if applicable.
Lease Time:
The lease time is the period of time before the DHCP server will assign new IP addresses.
DHCP Server

Dynamic Pool Settings

56