Table of Contents
Advertisement
EN
EN
8
8
Assembly of the machine
5. Place the steel frame 0 into the textile col-
lection basket 9 and attach all fastener to
the left, right and rear poles of the frame.
Make sure that all fasteners are secured cor-
rectly (fig. 6).
6. Installation of the completely assembled
collection basket on to the scarifier (fig. 7).
A.
Lift up the protective cover qa.
B.
Make sure that the ejection chute is
clear and free of debris.
C.
Place the fully assembled collection
basket on to the fastening points in
the rear part of the chassis, as shown.
D.
Place the protective cover qa on top
of the collection basket. Check that
the collection basket is seated cor-
rectly.
NOTE: For use without the grass catcher, the lawnmower may be used without the collection basket with the
protective cover qa in the lower position.
6
7
FZV 4010 E
Advertisement
Table of Contents
