Planning And Riding A Course; Creating And Riding A Round-Trip Course - Garmin EDGE 1030 PLUS Owner's Manual

Planning and Riding a Course

You can create and ride a custom course. A course is a sequence of waypoints or locations that leads you to
your final destination.
1 Select Navigation > Courses > Course Creator > Add First Location.
2 Select an option:
• To select your current location on the map, select Current Location.
• To select a saved location, select Saved, and select a location.
• To select a location for which you recently searched, select Recent Finds, and select a location.
• To select a location on the map, select Use Map, and select a location.
• To browse for and select a point of interest, select POI Categories, and select a nearby point of interest.
• To select a city, select Cities, and select a nearby city.
• To select an address, select Addresses, and enter the address.
• To select an intersection, select Intersections, and enter the street names.
• To use coordinates, select Coordinates, and enter the coordinates.
3 Select Use.
TIP: From the map, you can select another location, and select Use to continue adding locations.
4 Select Add Next Location.
5 Repeat steps 2 through 4 until you have selected all locations for the route.
6 Select View Map.
The device calculates your route, and a map of the route appears.
TIP: You can select
7 Select Ride.

Creating and Riding a Round-Trip Course

The device can create a round-trip course based on a specified distance, starting location, and direction of
navigation.
1 Select Navigation > Courses > Round-Trip Course.
2 Select Distance, and enter the total distance for the course.
3 Select Start Location.
4 Select an option:
• To select your current location on the map, select Current Location.
• To select a location on the map, select Use Map, and select a location.
• To select a saved location, select Saved Locations, and select a location.
• To browse for and select a point of interest, select Search Tools > POI Categories, and select a nearby
point of interest.
• To select a city, select Search Tools > Cities, and select a nearby city.
• To select an address, select Search Tools > Addresses, and enter the address.
• To select an intersection, select Search Tools > Intersections, and enter the street names.
• To use coordinates, select Search Tools > Coordinates, and enter the coordinates.
5 Select Start Direction, and select a direction heading.
6 Select Search.
TIP: You can select
7 Select a course to view it on the map.
TIP: You can select
8 Select Ride.
28
to view an elevation plot of the route.
to search again.
and to view the other courses.
Navigation