Viewing User Locations on the Map ........5 Replacement O-rings ..............12 Customizing the Map Icons ............ 5 Updating the Software Using Garmin Connect Mobile ..... 12 Repositioning Your Location ..........5 Updating the Software Using Garmin Express ......12 Deleting a Saved Location .............
Select an option to add your device to your Garmin Connect account: WARNING • If this is the first device you have paired with the Garmin See the Important Safety and Product Information guide in the Connect Mobile app, follow the on-screen instructions.
Segments Following a segment: You can send segments from your Garmin Connect account to your device. After a segment is The device scrolls through the widget loop. saved to your device, you can follow the segment.
Segments ™ time of a segment based on your performance during the You can download Strava segments to your Edge 130 device. segment. Follow Strava segments to compare your performance with your NOTE: This setting is enabled for all segments by default.
My Stats trainer that sends speed and distance data to the device. The Edge 130 device can track your personal statistics and Marking Laps calculate performance measurements. Performance You can use the Auto Lap feature to mark a lap at a specific ®...
The Edge device has Bluetooth connected features for your Hold compatible smartphone or fitness device. Some features require Select Mark Location. you to install the Garmin Connect Mobile app on your smartphone. Go to www.garmin.com/intosports/apps for more A message appears. The default icon for each location is a information.
Connect IQ Downloadable Features ™ You can add Connect IQ features to your device from Garmin ® and other providers using the Connect IQ Mobile app. Data Fields: Allow you to download new data fields that present sensor, activity, and history data in new ways. You can add Connect IQ data fields to built-in features and pages.
Snap the heart rate monitor module onto the strap. The Garmin logos on the module and the strap should be right-side up. Wet the electrodes and the contact patches on the back of the strap to create a strong connection between your chest and the transmitter.
The default maximum heart rate is 220 minus your age. Recovery Advisor You can use your Garmin device with a heart rate monitor to display how much time remains before you are fully recovered and ready for the next hard workout.
When the device memory is full, a message appears. The device does not automatically delete or overwrite your history. Disconnecting the USB Cable Upload your history to Garmin Connect periodically to keep track If your device is connected to your computer as a removable of all your ride data.
Hold Setting Up Extended Display Mode Select System > Sounds. You can use your Edge 130 device as an extended display to Ride Settings view data screens from a compatible Garmin multisport watch. For example, you can pair a compatible Forerunner device to ®...
*The device withstands pressure equivalent to a depth of 30 m. For more information, go to www.garmin.com/waterrating. Replacing the Heart Rate Monitor Battery Speed Sensor and Cadence Sensor Specifications Use a small Phillips screwdriver to remove the four screws on the back of the module.
◦ Connect your device to a computer using the USB cable parts. and the Garmin Express application. ™ ◦ Sync your device to the Garmin Connect Mobile app using Appendix your Bluetooth enabled smartphone. While connected to your Garmin Connect account, the device Data Fields downloads several days of satellite data, allowing it to quickly Some data fields require optional accessories to display data.
minutes, then start the timer and run for 20 minutes, your Maximum Speed: The top speed for the current activity. elapsed time is 35 minutes. Odometer: A running tally of distance traveled for all trips. This Elevation: The altitude of your current location above or below total does not clear when resetting the trip data.