Garmin EDGE 1030 PLUS Owner's Manual page 74

Odometer: A running tally of distance traveled for all trips. This total does not clear when resetting the trip data.
Pedal Smoothness: The measurement of how evenly a rider is applying force to the pedals throughout each
pedal stroke.
Performance Condition: The performance condition score is a real-time assessment of your ability to perform.
Platform Center Offset: The platform center offset. Platform center offset is the location on the pedal platform
where force is applied.
Power: The current power output in watts. Your device must be connected to a compatible power meter.
Power Bars: A bar graph showing your current, average, and maximum power output values for the current
activity.
Power Graph: A line graph showing your current, average, and maximum power output values for the current
activity.
Power Zone: The current range of power output (1 to 7) based on your FTP or custom settings.
Rear Gear: The rear bike gear from a gear position sensor.
Reps to Go: During a workout, the remaining repetitions.
Right Peak Pwr Phase: The current power phase peak angle for the right leg. Power phase peak is the angle
range over which the rider produces the peak portion of the driving force.
Right Power Phase: The current power phase angle for the right leg. Power phase is the pedal stroke region
where positive power is produced.
Shifting Advice: The recommendation to shift up or down based on your current effort. Your eBike must be in
manual shifting mode.
Speed: The current rate of travel.
Speed Bars: A bar graph showing your current, average, and maximum speed values for the current activity.
Speed Graph: A line graph showing your speed for the current activity.
Step Time: The time elapsed for the current workout step.
Sunrise: The time of sunrise based on your GPS position.
Sunset: The time of sunset based on your GPS position.
Target: During a workout, the target for the workout step.
Target Power: The target power output during an activity.
Temperature: The temperature of the air. Your body temperature affects the temperature sensor.
Time Ahead: The time ahead or behind the Virtual Partner.
Time in Zone: The time elapsed in each heart rate or power zone.
Time of Day: The time of day based on your current location and time settings (format, time zone, daylight
saving time).
Timer: The stopwatch time for the current activity.
Time Seated: The time spent seated while pedaling for the current activity.
Time Standing: The time spent standing while pedaling for the current activity.
Time to Destination: The estimated time remaining before you reach the destination. You must be navigating
for this data to appear.
Time to Go: During a workout or course, the remaining time when you are using a time target.
Time to Next: The estimated time remaining before you reach the next waypoint in the route. You must be
navigating for this data to appear.
Torque Effectiveness: The measurement of how efficiently a rider is pedaling.
Total Ascent: The total elevation distance ascended since the last reset.
Total Descent: The total elevation distance descended since the last reset.
Trainer Resistance: The resistance force applied by an indoor trainer.
Travel Range: The estimated distance you can travel based on the current eBike settings and remaining battery
power.
TSS: The Training Stress Score
Appendix
for the current activity.
™
67