Automatically Calculating Ftp; Viewing Your Stress Score; Turning Off Performance Notifications; Viewing Your Power Curve - Garmin EDGE 1030 PLUS Owner's Manual

Automatically Calculating FTP

Before the device can calculate your functional threshold power (FTP), you must have a paired power meter and
heart rate monitor (Pairing Your Wireless Sensors,
NOTE: The estimate may seem inaccurate at first. The device requires a few rides to learn about your cycling
performance.
1 Select My Stats > FTP > Enable Auto Calculation.
2 Ride at a steady, high intensity for at least 20 minutes outdoors.
3 After your ride, select Save Ride.
4 Select My Stats > FTP.
Your FTP appears as a value measured in watts per kilogram, your power output in watts, and a position on
the color gauge.

Viewing Your Stress Score

Before you can view your stress score, you must put on a chest heart rate monitor and pair it with your device
(Pairing Your Wireless Sensors,
Stress score is the result of a three-minute test performed while standing still, where the Edge device analyzes
heart rate variability to determine your overall stress. Training, sleep, nutrition, and general life stress all impact
how an athlete performs. The stress score range is 1 to 100, where 1 is a very low stress state, and 100 is a very
high stress state. Knowing your stress score can help you decide if your body is ready for a tough workout or
yoga.
TIP: Garmin recommends that you measure your stress score at approximately the same time and under the
same conditions every day.
1 Select My Stats > Stress Score > Measure.
2 Stand still, and rest for 3 minutes.

Turning Off Performance Notifications

Performance notifications are turned on by default. Some performance notifications are alerts that appear upon
completion of your activity. Some performance notifications appear during an activity or when you achieve a
new performance measurement, such as a new VO2 max. estimate.
1 Select My Stats > Performance Notifications.
2 Select an option.

Viewing Your Power Curve

Before you can view your power curve, you must pair your power meter with your device
Sensors, page 42).
The power curve displays your sustained power output over time. You can view your power curve for the
previous month, three months, or twelve months.
1 Select My Stats > Power Curve.
2 Select or to select a time period.

Syncing Activities and Performance Measurements

You can sync activities and performance measurements from other Garmin devices to your Edge 1030 Plus
device using your Garmin Connect account. This allows your device to more accurately reflect your training
status and fitness. For example, you can record a run with a Forerunner
and overall training load on your Edge 1030 Plus device.
1 Select My Stats > Training Status.
2 Select > Physio TrueUp.
When you sync your device with your smartphone, recent activities and performance measurements from your
other Garmin devices appear on your Edge 1030 Plus device.
My Stats
page 42).
page 42).
(Pairing Your Wireless
device, and view your activity details
®
23