Using The Course Pointer; Navigating With Sight 'N Go - Garmin GPSMAP 67i Quick Start Manual

Using the Course Pointer

The course pointer is most useful when you are navigating to your destination in a straight line, such as when
you are navigating on water. It can help you navigate back to the course line when you go off-course to avoid
obstacles or hazards.
1 Press PAGE to scroll to the compass page.
2 Press MENU.
3 Select Heading Setup > Go To Line (Pointer) > Course (CDI) to enable the course pointer.
Course line pointer. Indicates the direction of the desired course line from your starting point to your
next waypoint.
Course deviation indicator (CDI). Indicates the location of the desired course line in relation to your
location. If the CDI is aligned with the course line pointer, you are on course.
Course deviation distance. The dots indicate your distance off course. The distance represented by
each dot is indicated by the scale in the upper-right corner.
To-and-from indicator. Indicates whether you are headed to or away from the next waypoint.

Navigating with Sight 'N Go

You can point the device at an object in the distance with the compass direction locked in, project the object as
a waypoint, and navigate using the object as a reference point.
1 Press PAGE to scroll to the compass page.
2 Press MENU.
3 Select Sight 'N Go.
4 Point the device at an object.
5 Select Lock Direction > Set Course.
6 Navigate using the compass.
14 Using the Main Pages